MitoQUAD™ Wavelength Belt

$399.00 $599.00 USD


The MitoQUAD™ Wavelength Belt with innovative TriChip™ technology contains a whopping 405 diodes, each containing three distinct LED chips = 1,215 chips per belt - yielding incredible coverage of all four wavelengths!

Why choose a red light therapy belt vs a panel? Obviously we like the versatility that is afforded by our red light therapy panels, however for certain circumstances, a belt may be a better choice. For example, if you plan to use the device primarily on a single body part such as the lower back, abdomen or quadricep, the belt may be a better option for you. The belt is also lightweight and compact and great for travel! 

The MitoQUAD Wavelength Belt is one-of-a-kind and uses the same 4 wavelengths as our patent pending MitoADAPT 2.0 series

To learn more about 810nm light specifically, and why we think it can level-up the belt for certain applications, we recommend this article. 

Related Article: Everything You Need to Know About Red Light Therapy and Weight Loss

 Click for assembly videos and user manual.

  • Battery Capacity: 15,000 mAh
  • 67% Near Infrared (NIR), 33% Red
  • LEDs: 405 diodes with unique tri-chip technology: 3 chips per diode = 1,215 LED chips per belt!
  • Wavelengths: 630nm, 660nm (Red) & 810nm, 850nm (NIR).
  • Intensity: 5 intensity levels to choose from.
  • Power Input: 120V (can be used internationally with plug adapter)
  • Charge Power Output: 12V
  • Weight: 1.2 pounds
  • Dimensions: 50"x7"
  • Treatment area dimensions: 22" x 5"
  • Irradiance: 18mW/cm2
  • 1 Year Warranty
  • Runs 2-6 hours on a single charge (depending on intensity level selected)


The MitoQUAD Wavelength Belt contains 405 LED diodes with 3 chips per diode = a whopping 1,215 LED chips total!

Beware low quality belts / wraps out there, that use less than half the amount of LEDs and space them out quite a bit.

The belt is meant to be used right up on the skin so having a HIGH quantity of diodes close together is absolutely critical to eliminate dead space and deliver maximum results.

The QUAD contains unique tri-chip technology with two distinct diodes: 660nm, 850nm, 850 nm and 630nm, 810nm, 810nm


The MitoQUAD Wavelength Therapy Belt can be used by plugging into a standard wall outlet OR by using the included power bank.

This means you can have the freedom of movement and need not be tethered to the nearest wall outlet.

Most other red light therapy belts on the market either need to be plugged in or they charge extra for a power bank.

The Quad Belt amps up the Near Infrared penetration by having 2/3 of the LEDs in the NIR spectrum.

630nm LED chip: 202pcs

660nm LED chips:203pcs

810nm LED chip: 404pcs

850nm LED chip: 406pcs


With FIVE intensity levels and the ability to use red alone, NIR alone or both together, find the light combination and intensity that works best for you.

Q: Is the Irradiance on the belt low?

A: Yes - it's supposed to be! For three primary reasons:

1) Reflection: Our panels range from ~2.0J - 3.5J at the usage distance, but some studies suggest that as much as 50% of that energy can be lost due to reflection.

2) Proximity: The belt is meant to be used right up on the body, so the light must be lower intensity to optimize for safety.

3) Duration: Even after factoring for the benefit of no reflection, the light is lower powered so we recommend longer session times of ~20 minutes. This is easier to accomplish due to convenience and portability of the belt


The MITO RED LIGHT Advanced Red Light Therapy Belt's customized battery has an incredible 15,000 mAh capacity.

This means you can spend more time conquering your day and less time worrying if your belt battery is charged for use.

The custom battery provides over 2 hours of use at the highest setting and as much as 6 hours of use at lower intensity levels, before needing to be recharged,

Mito Red Light Video Series

Getting Started