MitoPRO+ Series

The MitoPRO+ uses four wavelengths: 630nm, 660nm, 830nm, and 850nm — split equally at 25% each. Two red wavelengths (visible) and two near-infrared wavelengths (invisible, felt as gentle warmth).

These four were selected based on Karu & Kolyakov’s published peak action spectra for cytochrome c oxidase — the primary cellular photoreceptor in red and near-infrared light therapy. See the full wavelength evidence guide →

The 660nm + 850nm combination became an industry standard through convention, not science. Karu & Kolyakov (2005) measured the actual peak action spectra of cytochrome c oxidase at approximately 623nm, 671nm, 812nm, and 827nm.

The MitoPRO+ uses 630nm and 830nm to better bracket these measured peaks. Standard 660+850nm devices miss the 623nm and 827nm peaks entirely. Mito Red Light was one of the first consumer panel manufacturers to implement this wavelength selection — first shipped in 2020. Read the science →

MitoPRO+ (630, 660, 830, 850nm) — 4 wavelengths, simple interface, best value. The most tried-and-tested panel in the lineup.

MitoPRO X (590, 630, 660, 810, 830, 850nm) — adds 590nm amber and 810nm NIR (the globally most-studied wavelength), plus touchscreen, brightness control, and app integration.

MitoADAPT (590, 630, 660, 670, 810, 830, 850, 940nm) — 8 wavelengths, 11 modes, patent-pending. Adds 670nm (leading wavelength in eye and brain research) and 940nm (deepest tissue penetration). The most advanced panel in the lineup.

All three use identical wavelengths and achieve similar irradiance at 6 inches. The difference is size and coverage:

300+ — 60 LEDs, 90W, 9”×17”. Best for face, neck, and targeted treatment. Includes a tabletop stand.

1000+ — 200 LEDs, 270W, 13”×35”. Best for upper or lower body per session.

1500+ — 300 LEDs, 375W, 13”×47”. Most popular. Full-body coverage for most users in a single session.

Multi-panel arrays (2–4 panels) are available for maximum coverage and save $100–$400 vs buying separately.

The 300+ includes a tabletop stand attached to the unit. The 1000+, 1500+, and all array configurations ship with over-the-door hooks and steel hanging cables — no stand required to start using the panel.

Optional accessories: Floor Stand ($139) for single panels, or the Universal Stand ($349) for multiple panels or array configurations.

Note: 4-panel arrays are vertical only — horizontal mounting is not supported for arrays of 4.

Every MitoPRO+ includes: remote control, power cable, detailed user manual, opaque protective goggles, and Mito Red IR3 glasses. The 300+, 1000+, and 1500+ also include an over-the-door hook, steel hanging cables, and 4 vinyl hanging straps. The 300+ includes a tabletop stand.

Stand 6–12 inches from the panel surface. Irradiance is measured at 6 inches. Sessions are typically 10 minutes per treatment area. The built-in timer and remote make this easy to track.

You can use the panel daily. Most users notice results within 4–8 weeks of consistent use at 4–7 sessions per week.

Yes, daily use is safe and commonly recommended. Most users see optimal results with 10-minute sessions per treatment area, 4–7 times per week. Results typically become noticeable within 4–8 weeks of consistent use.

The MitoPRO+ has three modes: red light only (630nm/660nm), near-infrared only (830nm/850nm), or both combined — giving you flexibility to adapt sessions to specific goals.

We do not recommend sauna use. Regular exposure to high heat and humidity can reduce LED lifespan and affect panel performance over time.

At 6+ inches, the MitoPRO+ emits no detectable EMF. There is no Bluetooth or WiFi transmitter (a major source of RF in competing app-enabled devices). The panel is also flicker-free, using specialized LED drivers to eliminate AC current artifacts. At close range, magnetic field measurements are 0.0–0.5mG — well below conservative safety guidelines.

The MitoPRO+ is ETL certified (meeting UL electrical safety standards), BSCI certified, and ISO 9001/14001/45001 certified. All irradiance data is independently verified by a professional laboratory using spectroradiometry. View the third-party test data →

Every MitoPRO+ includes a 3-year warranty and a 60-day money-back guarantee. If you are not satisfied within 60 days of purchase you can return the panel for a full refund. Free US shipping applies to all orders in the lower 48 states. The MitoPRO+ is also HSA/FSA eligible — pay with your health spending account and save up to 30%.

Yes. As an FDA Class II registered medical device, the MitoPRO+ qualifies for HSA and FSA purchase. This can save 25–30% depending on your tax bracket. Learn how to use your HSA/FSA →

Yes. Financing is available at checkout through Shopify’s installment partners. The MitoPRO 300+ starts at approximately $10/month over 36 months. Select your financing option at checkout — no hard credit check required for most plans.

We recommend plugging each panel directly into its own wall outlet. If an extension cord is necessary, it must be a heavy-duty 3-prong cord rated to handle the full wattage of your configuration — the 300+ draws 90W, the 1000+ draws 270W, and the 1500+ draws 375W. Never use an undersized cord, as this creates a fire and safety hazard.

Do not daisy-chain more than two panels together. This warning is printed on the back of every MitoPRO+ panel. For a 4-panel array, plug two pairs into two separate outlets rather than chaining all four in series. Daisy-chaining concentrates the full combined wattage through the last cord — up to 1,500W for a 4-panel array. Keeping each cord’s load as low as possible (750W per pair) is the safest approach and maximizes the longevity of your equipment.