MitoPRO X | Red Light Therapy Panel Series

The MitoPRO X uses six precision wavelengths: 590nm (amber), 630nm, 660nm, 810nm, 830nm, and 850nm — delivered via TruDUAL™ dual-chip LED packages.

590nm amber — studied for skin health, collagen support, nitric oxide release, and serotonin modulation. 630nm + 660nm — core red light wavelengths targeting cytochrome c oxidase peak action spectra. 810nm — the globally most-studied NIR wavelength (1,200+ studies), particularly for brain, nerve, and deep tissue. 830nm + 850nm — deep NIR penetration for muscle, joint, and systemic recovery.

TruDUAL™ Chip Technology means each LED lens package contains two independent chips on separate circuits. This allows the panel to operate as:

100% Red (590nm + 630nm + 660nm) — full intensity red light only
100% NIR (810nm + 830nm + 850nm) — full intensity near-infrared only
50% Red + 50% NIR — both simultaneously at full intensity per channel

This is fundamentally different from single-circuit dual-chip designs where both chips always switch on or off together. The MitoPRO X delivers full irradiance in every mode — not a watered-down split.

810nm is the most studied wavelength in photobiomodulation research, with over 1,200 published studies — particularly for brain health, neuroprotection, and nerve regeneration. It also sits closer to the cytochrome c oxidase absorption peak in the 800–830nm range identified by Karu & Kolyakov (2005), and achieves greater tissue penetration depth than 850nm due to reduced water absorption at this wavelength.

Most consumer panels use 850nm because it is easier to source. The MitoPRO X includes 810nm specifically to capture these research advantages.

590nm amber has been studied for its unique effects on skin elasticity, collagen production, and nitric oxide release in vascular tissue. Nitric oxide is a key signaling molecule involved in circulation, immune response, and cellular communication.

590nm also sits at a wavelength associated with serotonin modulation and may have circadian rhythm benefits. It is rarely included in consumer panels due to LED sourcing cost — the MitoPRO X includes it as a precision addition for comprehensive wavelength coverage.

The MitoPRO X features a full-color touchscreen for direct panel control, plus Bluetooth app integration with the Mito Red Light app for iOS and Android.

Via the app you can: control modes and intensity remotely, access advanced modes like NIR Extend (up to 20 continuous NIR minutes), set the smart alarm function to auto-start sessions at a set time, track session history and total minutes by mode, and provide subjective feedback to identify your most effective settings.

The MitoPRO X has three onboard modes: Mode 1 - All wavelengths --50% Red/Amber + 50% NIR; Mode 2 100% Red/Amber (590/630/660nm); Mode 3 - 100% NIR (810/830/850nm), limited to 5 minutes on the panel (since NIR is invisible, this prevents inadvertent extended exposure).

Via the Mito Red Light app: NIR Extend mode runs continuous NIR for up to 20 minutes (cycles briefly to red every 4 minutes); additional modes are added with app updates.

300X — 60 lens / 120 chip, 125W. Targeted use: face, neck, joints. Includes tabletop stand.
750X — 150 lens / 300 chip, 225W. Upper or lower body per session.
1500X — 300 lens / 600 chip, 445W. Full-body coverage for most users in a single session.
750X & 1500X array — 450 lens / 900 chip, 670W. Full body dual-panel.
MegaX — 600 lens / 1,200 chip, 900W. Extra-wide single-piece full-body panel.
2x 750X & 1500X — 900 lens / 1,800 chip, 1,340W. Double full-body coverage.

Stand 12-18 inches from the panel. Sessions are typically 10 minutes per treatment area for Modes 1 and 2. Mode 3 (NIR only) is capped at 5 minutes on the panel — use NIR Extend mode in the app for longer NIR sessions.

Daily use is safe and recommended. Most users notice meaningful results within 4–8 weeks of consistent use at 4–7 sessions per week.

The MitoPRO X is certified to IEC 60601-1-2 (EMC compatibility), IEC 60601-2-83 (home light therapy equipment safety), IEC 60601-1-6 (usability engineering), IEC TS 60601-4-2 (home healthcare performance), BSCI, ISO 9001/14001/45001, MDSAP, and ISO 13485 (medical device quality management). All irradiance data is independently third-party verified by spectroradiometry. View test data →

At 6+ inches, the MitoPRO X emits no detectable EMF. The panel is flicker-free and uses specialized LED drivers to eliminate AC current artifacts. There is no WiFi transmitter — Bluetooth is used only for app connectivity and can be disabled when not in use.

Every MitoPRO X includes: power cable, detailed user manual, opaque protective goggles, and Mito Red IR3 glasses. The 300X includes a tabletop stand. The 750X, 1500X, and array configurations include over-the-door hook, steel hanging cables, and 4 vinyl hanging straps. The MegaX includes a steel L bracket for floor-to-wall installation. 2 or 4 panel arrays receive remote control to control all panels. Universal and floor stands are sold separately.

Every MitoPRO X includes a 3-year warranty and a 60-day money-back guarantee. Free US shipping on all orders. The MitoPRO X is HSA/FSA eligible as an FDA Class II registered medical device — save 25–30% depending on your tax bracket. Learn how →

Yes. Financing is available at checkout through Shopify's installment partners. No hard credit check required for most plans.