MitoMID 2.0

Here's some quick guidance:

MitoPRO + Series - Available only from Mito Red Light, the award-winning MitoPRO + series incorporates the four most bio-active wavelengths 630nm / 660nm (Red) and 830nm / 850nm (Near Infrared). This unique configuration drives enhanced efficacy by delivering increased light energy at the parts of the spectra which maximize cytochrome c oxidase activation. Also comes with a built in integrated control panel and timer (control an entire array with the push of a button). The MitoPRO + Series stands out as a unique and top-tier red light therapy option, offering simplicity for time-buyers in the realm of red light therapy. Learn more about the science behind the MitoPRO + here.

MitoPRO X Series -  BRAND NEW in 2024. The MitoPRO X marks a significant leap forward in red light therapy, embodying user-centric design, touchscreen interface, brightness control, alarm function, Mito Red mobile app compatibility and more. With five carefully selected and mindfully apportioned peak LED wavelengths (590nm, 630nm, 660nm, 810nm, and 830nm), and built upon the proven MitoPRO + platform, the MitoPRO X is true next-generation light therapy. Learn more about the MitoPRO X Series here.

MitoADAPT Series - Unquestionably the most advanced red light therapy panel ever created. The patent-pending MitoADAPT Series with dual chip multi-wavelength design provides an incredible ELEVEN different possible modes (red and near infrared wavelength combinations). If you want the absolute cutting edge of individualized, customizable red light therapy, learn more here about the MitoADAPT 2.0 design.

There are four main areas of EMF that we discuss below:

RF (radiofrequency): Other than the MitoADAPT, none of our devices contain any bluetooth or WiFi transmitters. The bluetooth can be disabled on the MitoADAPT if the user desires to do so. 

Magnetic Fields: Any electrical device running on AC (alternating current) will generate some kind of magnetic field. Hence why we describe our products as "Low EMF" and not "Zero EMF". Our battery powered devices (mobile units, belts, helmets) are DC current and have zero magnetic fields. Our plug-in panels do create some magnetic field. We have consulted with EMF experts and had our plug-in panels tested with highly sensitive commercial grade EMF measuring equipment - at the recommended usage distance the magnetic field can range from 0.0mG (milligauss) to ~0.5mG (above ambient levels). To put this in perspective, the highly conservative BioInitiative Report recommends an exposure limit of 1.0mG for 24/7 exposure for pregnant women and children. To further put that in perspective, ICNIRP has set a general public exposure level limit of 400 microtesla or 4,000mG! In sum, our devices put out little to no magnetic field and are much, much lower than many other household appliances. 

Electric Fields: Our devices have been tested and have been found to generate no electric fields on the face of the panels. Additionally, the patent-pending MitoADAPT comes standard with a shielded power cable. 

Flicker: Flicker is an artifact of AC (alternating current). All of our plug-in panels use specialized LED power drives to eliminate the flicker caused by alternating current. Our battery powered products  (mobile units, belts, helmets) are DC current and have zero flicker. 

Our devices are engineered to have low EMFs. However, anything with electric current running through it is going to generate some electromagnetic field. At the recommended usage distance of 6+ inches our devices emit no detectable levels of EMF. 

On balance our devices are going to be much lower in EMFs than other products because our lights contain only the electrical components needed to power and cool the lights (nothing extraneous added such as bluetooth / WiFi). Of particular concern are products which come with an 'app'. Having an app necessitates a WiFi / bluetooth signal from the device. Many times these devices can emit a signal even when they are not in use! This means you could be unknowingly polluting your environment with EMFs 24/7.

For more information, please watch those videos: 

EMF Expert Brian Hoyer Tests Mito Red Light Portable Devices

EMF Expert Brian Hoyer Tests the Mito Red Light Cabin

Yes, the MitoPro 300 x, MitoPRO 300+ and MitoADAPT MIN 2.0 come with a robust 180 degree stand that is attached to the light (as shown in the product photos). The MitoMIN 2.0 comes with a kickstand as shown in the product photo.

Some LED light panel manufacturers use a wide beam angle of 90 degrees. The problem with using a very wide beam angle is that the power density drops quickly over distance. The angle that light comes out of a light source is the main factor in determining how the power density drops over distance. Wide beam angles (90 degrees) make the power density weaken very soon. If you are planning to use the light for a larger area (and therefore plan on sitting / standing back further from the device), a 90 degree beam angle typically is not the best choice.

Conversely, other light panel manufacturers may use a very narrow beam angle of 30 degrees. This design choice often necessitates the LEDs being packed closer together to avoid dead spots. This may mean higher 'peak' power measurements for the lights, but the devices tend to be physically smaller (due to the LEDs needing to be closer together).  Anectodical experience with 30 degree beam angle devices is that they can be uncomfortable to even briefly glance at. We consider 30 degree beam angle devices to be generally less safe and less user friendly than wider beam angle devices.

The Mito Red Light Panels use a 'sweet spot' beam angle of 60 degrees to ensure therapeutic power density at further distances, while maximizing for usability, comfort and safety.

For our Adapt 2.0 and Pro+ Panels, you can purchase a floor stand for one unit. If you would like to use multiple panels at once the Universal stand is a great option. 

We do not offer any wall mounts for our panels. We generally do not recommend hanging the panels from a wall as many of our panels are heavy and weigh over 20+ lbs.

We generally do not recommend using our lights in any type of Sauna as regular exposure to high heat / humidity may reduce the life span of the LEDs.

Using a 3 prong extension cord is fine as long as the cord is rated for the power of the device(s). Some of our larger panels and multi-light arrays can draw significant current - it is important that the cord is rated to be able to handle the total current drawn. All of our plug in panels have the power consumption figures listed on the product listings. If you have any questions please contact customer service.